Which position will restore hp

Remove media from internal drives, and remove any recently added internal hardware. If you are prompted for an Administrator password or confirmation, type the password or provide confirmation.

If a User Account Control window asks if you want to allow the program to make changes to the computer, click Yes. Under I need help immediately , click System Recovery. The Recovery Manager asks if you want to restore the computer to its original factory shipped condition. Click Yes , and then click Next.

The computer restarts. If the recovery partition on the hard disk drive is functioning correctly, the Recovery Manager window displays. Follow the instructions listed in the section Recovery from recovery discs. If you have already backed up personal files or you do not want to back up personal files, select Recover without backing up your files , and then click Next. Continue to the next step. If you want to back up your personal files, follow these steps to create a backup. Select Back up your files first recommended , and then click Next.

Recovery Manager scans the computer for storage devices. Select the storage device to save the backup, and then click Next. When Recovery Manager is finished backing up files, remove the backup disc or storage device, and then click Next to continue with the recovery process. Other reasons for failed backups might be caused by file corruption. In some cases, it might not be possible to save files using this backup method.

After the system recovery is complete, click Finish to restart the computer. Complete the setup screens and wait until the computer finishes the setup. Once the setup is complete, turn off the computer, reconnect all devices and cables, and then turn on the computer. Before using the computer, update and protect your computer. Reinstall any virus and security software that was installed before the system recovery. Reinstall any software programs that were added after purchasing the computer, as well as any files that were backed up.

Recovery from the startup screen during system boot OR when unable to boot to login in screen If Windows 7 does not open correctly, perform the following steps to recover the computer:.

If an error message indicates that System Recovery cannot be run from the startup screen, a set of recovery discs is needed to perform a system recovery. Turn on the computer and repeatedly press the F11 key, about once every second, until Recovery Manager opens.

Recovery from recovery discs Perform the following steps to recover the computer using a set of recovery discs either CDs or DVDs. These discs can be a set that was received from HP Support or discs that you created. You can obtain recovery discs from HP Support, or use Recovery Manager software to create a set of recovery discs yourself.

HP recommends creating a set of recovery discs when you receive your computer and storing them in a safe place. Support Sent Recovery Discs can take as long as 4 to 6 hours to complete system recovery, but recovery discs that you create often take less time to complete system recovery. Turn on the computer, and then insert the first recovery disc into the drive. Remove media from internal drives, and then remove any recently added internal hardware.

Immediately press the Escape key repeatedly, about once every second, until a Startup Menu or Select boot device menu opens. The selections you need to make vary slightly depending on the type of menu that displays on your screen:. Then press Enter. When recovery starts, continue using the steps to complete recovery.

A window might display and prompt you to choose whether to run Recovery Manager from the hard disk or from the disc inserted. If this window displays, select the Run program from disc , and then click Next. Select your model. How does HP install software and gather data? Learn how to upgrade to Windows 11 Windows 11 Upgrade Guide. Scanner software does not start If the scanner system software does not start up when the touch screen is turned On, try turning it Off and then On again.

When the software has been reinstalled, it will prompt to remove the DVD and restart the touch screen. When the touch screen restarts, it will prompt to calibrate the position of the pointer. Please do so by touching the targets that will appear three times. To obtain a good and consistent calibration, the user should be standing in the normal position and using whatever pointer normally used to operate the touch screen finger, or some other object. After touching the three targets, the user will be prompted to touch any part of the touch screen.

If the calibration results are good, press the Yes button. If the system prompts to restart, press No. The language selection screen should appear. Select the desired language for the Designjet Scan application. Once you have confirmed that the restore tool supports the format of the files you are trying to restore, click OK.

Figure : Click Help. Figure : Confirm the format of the files you are trying to backup. Select the types of files you want to restore, for example: pictures, music, videos, documents, Click Next.

Figure : Restoration in progress. A shortcut to this file location is also created on the Windows desktop. Click Next to continue. Figure : Location of restored files. Figure : Files restored. After the HP Recovery Manager restores the files, double-click the Shortcut to System Recovery files on your desktop to view the restored files.

Make sure you explore every folder of the restored files and do not delete anything until you are sure that all your important information has been restored on your computer. Figure : Restored files. Select a location. Europe, Middle East, Africa. Asia Pacific and Oceania. Select a language. Confirm Back. Search all support.